MP-ALM3000-36/48 Panic Rim Exit Device
| Alarm Exit Hardware |
MP-ALM3000-36/48 Panic Rim Exit Device |
| MP-ALM7000-36/48 Fire Rim Exit Device |
|
| Rim Type Exit Devices |
 |
| MP-ALM 3000-36 Alarm rim type 36" door (panic grade) | |
| ALM MP-3000-48 Alarm rim type 48" door (panic grade) | |
| ALM MP-7000-36 Alarm rim type 36" door (fire grade) | |
| ALM MP-7000-48 Alarm rim type 48" door (fire grade) | |
| Prefix "ALM" before part #. |
MP-ALM6000-36/48 Panic Rim Exit Device |
| MP-ALM9000-36/48 Fire Rim Exit Device |
 |
| Rim Type Exit Devices |
|
| MP-ALM 6000-36 Alarm rim type 36" door (panic grade) | |
| MP-ALM 6000-48 Alarm rim type 48" door (panic grade) | |
| MP-ALM 9000-36 Alarm rim type 36" door (fire grade) | |
| MP-ALM 9000-48 Alarm rim type 48" door (fire grade) | |
| Rim Type Exit Devices |
| Alarm units has an internal horn. When the push rail is depressed, the horn sounds to provide audible an means of signaling that the door has been opened and violated, The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off. Jumper cable is provided to swich to continuous alarm. The key switch to turn the alarm off is a standard 1 1/4" cylinder with "C" keyway. The alarm operates on one standard 9 volt transistor battery, when battery is weak the horn will emit an intermittent signal. Alarmed units are supplied with two switches. One switch monitors the push rail and the other switch monitors the latahbolt for full proof security. Unit includes "emergency exit only. Alarm will sound" decal for application on door or unit. |
| Vertical Rod Exit DeviceLess Bottom Rod-Lbr |
| MP-6100BTL-36/48 Panic Rim Exit Device |
| MP-9100BTL-36/48 Fire Rim Exit Device |
| Specifications LBR - No bottom strike, free access for wheel chairs, strectcher and carts therefore eliminates tripping potential and disfiguration of floors due to dragging of bottom bolts. |
||
| Door | : |
1-3/4" thick standard. 3-3/4" minimum stile width required for single door application. 3-1/2" minimum stile width required for double |
| Chassis | : |
Nonferrous alloy (Panic Grade), steel (Fire Grade). |
| Cover | : |
Drawn stainless steel, steel and brass. Cover stock hollow metal doors with 161 cutout. |
| Mounting | : |
Furnished standard with wood and machine screws. Thru bolts are standard packing on fire rate devices. |
| End cap | : |
Steel Construction. |
| Handing | : |
Specify at the time of order LHR or RHR for convenience |
| Latch Bolt Spring | : |
Stainless Steel Steel |
| Fire Certificate | : |
ANSI A156.3 Grade 1UL and UKC Listed - for all series of panic device. BTL series for fire exit hardware for all types of 8'x8' double door including double egress for up to 3 hours metal. Conforms to standards UL10C and UBC7-2-1997 codes. |
| Rail Assembly | : |
Heavy gauge Steel, painted |
| Finish | : |
BHMA 600, 605, 606, 611, 612,613, 625, 626,628, 630 |
| Door Size | : |
3'x8' , 4'x9' and 3'x9' doors |
 |
 |
 |